The Caster E9 is a casting machine for automatic and high capacity casting of half-slab and solid slab with wet concrete on a long bed. It also compacts the casted concrete and runs on the rails of the production beds.
Elematic Caster P7 casting machines are available as half-portal or bridge-type, with sector gates or with a belt feeder.
They are well suited to casting horizontal molds, battery molds and special molds.
The Elematic Comcaster E9 is designed to cast and pour concrete for precast wall panel production. It offers a fast casting speed of up to 2000 l per minute with self-compacting concrete and up to 1000 l per minute with wet concrete.
The Extruder E9-1200e is an extrusion casting machine that produces hollow core concrete slabs of 120 mm – 500 mm thick and 400 mm – 1200 mm wide. It is the flagship of the best-in-the-industry extruders and sets a new benchmark for high-speed casting – 2,7 meters per minute – with low production costs.
The Extruder P7 is an extrusion casting machine for producing hollow core concrete slabs 1200 mm wide in a variety of thicknesses. The machine utilizes shear compaction to control the concrete properties, which allows for optimal cement use in the concrete mix.
The Extruder S5 is an extrusion casting machine for hollow core concrete slabs 1200 mm wide in a variety of thicknesses. It consists of a universal casting module and a slab-type-specific product module.
Frame caster P7
The half-portal or bridge-type Elematic frame caster P7 provided with sector gates is designed for dosing of concrete into beam molds and as intermediate concrete storage between the concrete transport line and the extruder.
Multifunction wagon S5
The Elematic multifunction wagon S5 is designed to tilt, vibrate and transport molds on a precast wall production line.
The multifunction wagon S5 has both compaction and tilting features. It is equipped with four wheels and is positioned under the table during casting. It uses four hydraulic cylinders for compaction. After curing, the multifunction wagon can tilt the table to remove the finished wall unit.
Do you have questions? Contact us!