The Elematic Bed E9 is a casting bed designed for production of hollow core slabs, half-slabs, massive slabs, piles, and inverted T-slabs, among other things.
|Slab width, nominal||1200 mm|
|Rail gauge||1290 mm|
|Surface plate thickness||8 mm|
|Min. ambient temp.||+5 °C|
The Elematic Bed E9 is manufactured in a workshop to tight tolerances. The bed features a rigid all-steel structure and the top surface is welded on. Bed E9 features an integrated heating system to speed up curing and ensure better bonding between the concrete and prestressing strands. The heating pipes are installed under the bed surface, and hot water is used as a heating medium. Thermal stresses are well managed because heat is transferred as radiation to the surface plate. Energy consumption is kept low, because only a small mass needs to be heated. Bed E9 is delivered in 12 m modular, quick-to-install sections. The total bed length is defined according to case-specific requirements. The maximum load of the bed is 660 kg/m2. For controlled curing, Maturity controller E9 is recommended.
Bed E9 is made from 160 mm U-beams, stiffeners and a durable 8 mm straight rolled acid treated surface plate. It is equipped with rails for production machinery.
Abutment P7-300 Abutment E9-300 Maturity controller E9-6mc Maturity controller Pump Bed gutter plate