Skip navigation

Driller E9

The Elematic Driller E9 is designed to drill water holes into hollow core slabs during precast concrete production. The holes are required to allow water to drain out of the slab voids during storage and installation on site.

Driller E9-1200d

Length min. 4100 mm
Width 2050 mm
Height 1950 mm
Weight 3200 kg
Max. length of slab 24 m

The Driller E9 features two drilling units that simultaneously drill holes from underneath into the voids at both ends of the slab. All the holes are drilled in one go in less than 10 seconds The Driller can be used in slabs with 8, 6, 5 and 4 voids.

OPERATION

The slab is moved into place for drilling by a crane and placed on both drilling units. The distance between the units can be adjusted with drive motors.

A signal light shows when drilling is complete.

BUILT-IN SAFETY

The Driller E9 meets all EC Machine Directive requirements. It is delivered with comprehensive operator, maintenance and safety manuals in the required language.

CONSTRUCTION

The Driller E9 consists of two portal-type semi-automatic drilling units that move on the edge rails of the casting bed. Electric power is supplied to one of the units through a cable drum; the length of the cable (without a plug) is 48 m. The drilling units are connected to each other by a 28 m long cable.

OPTIONS

  • Drilling machines
  • Drill bits

A part of

Precast products

Do you have questions? Contact us!

Accept cookies to see the form or visit our contact page for more information.

or

Accept cookies to see the form or visit our contact page for more information.